Description

Statement of Requirement This scope of work outlines the contractor's responsibility to furnish all labor, travel, transportation, materials, shipping, parts, connections, and equipment required for the provision and on-site installation of the following at 4801 Linwood Blvd, Kansas City, MO. 64128, to support the Sterile Processing Service (SPS) department for medical procedures and surgeries in the OR Surgical Suites, Cath Lab, Dental Clinic, Eye Clinic, and Podiatry Clinic: four (4) AMSCO™ 7053HP Washer Disinfectors, four (4) SCS Conveyors, one (1) SCS Return Door, four RAS Cycles for 7053HP, and two (2) RAS 12 Long Racks. The contractor will also provide comprehensive training to clinical staff before the equipment is used. This training must cover all work shifts within the sterile processing department, and the contractor will be responsible for annual retraining on all equipment. Additionally, the contractor shall remove and properly dispose of all debris and packing materials generated during washer equipment installation. The complete acquisition, procurement, and installation process includes all essential non-union labor and materials for the uncrating, setting in place, and assembly of the Steris equipment. The quoted price assumes work is performed during normal business hours, Monday to Friday, from 8:00AM to 5:00PM, unless otherwise indicated, as part of its Installation Services, Steris will also provide an operational check-out test, make any necessary adjustments and conduct a demonstration of the equipment's functionality for the appropriate facility staff. 2. SPECIFICATIONS Minimum of four washer disinfectors shall have minimum operations dimensions of 1067 x 2051 x 965 mm (42 x 80-3/4 x 38") with chamber dimensions 673 x 667 x 800 mm (26-1/2 x 26-1/4 x 31-1/2"). Conveyor Return Line 521lbs, (H)x31 inches (W)x32 inches (D)x161 inches Plumbing-Drain only Electrical: Special electrical requirements Utility: Med Gas-Air, high pressure (85 PSIG) max Utility: Misc-CAT 6 to nearest T-Comm Room Emergency stop/disconnect capabilities Pressure release push button Stand-alone return line Return line provides the transportation of racks to the soiled side from the clean side. Prior to use all packaging material must be properly removed from the RAS Rack: two additional port connectors are safely put aside; and the RAS filter assembly is in place. Ensure robotic cycle has been configured on Washer/Disinfectors. Per AAMI Standards ST79-2017 & 2020 Amended A1, A2, A3, A4 (Consolidated Text) Comprehensive guide: Selection of mechanical cleaning equipment should be based on the requirements for cleaning of the devices to be processed. The mechanical cleaning equipment currently available for reprocessing medical devices that are moisture-, detergent-, and temperature-stable include the following: a) Ultrasonic cleaning equipment b) Irrigator cleaners c) Ultrasonic irrigators d) Ultrasonic irrigator washers e) Ultrasonic irrigator wash…

Classification

Place of Performance

Contracting Office

Contacts

Attachments (1)

• Attachment 1