Description

Opportunity : Lawrence Livermore National Laboratory (LLNL), operated by the Lawrence Livermore National Security (LLNS), LLC under contract no. DE-AC52-07NA27344 (Contract 44) with the U.S. Department of Energy (DOE), is offering the opportunity to enter into a collaboration to further develop and commercialize its nobel-ice-modulated superconducting circuit. Background : Superconducting resonators and qubits must hit target frequencies with ± kHz precision, yet lithography, thin-film variation and unknown surface adsorbates routinely scatter them by >100 MHz—forcing designers to leave wide spacing between elements, accept low wafer yield, or add lossy, noisy tuning hardware. Today's state-of-the-art fixes are: (1) embedded SQUID loops flux-biased through extra control lines—effective but limited in range and plagued by 1/f flux noise and wiring overhead; (2) ex-situ trims such as laser annealing of Josephson junctions (LASIQ, 2022) or Alternating-Bias Assisted Anneal (ABAA, 2024)—which shrink spread at room temperature but drift back during cryogenic cooldown; and (3) geometric over-etch / dielectric varactors for MKIDs—adding fabrication steps and introducing loss. None of these approaches simultaneously offer large tuning range, zero added dissipation, minimal complexity, and the ability to correct shifts after the device reaches its 10 mK operating temperature. A gap therefore remains for a passive, cryogenic, loss-free post-fabrication tuning method that can collapse frequency scatter without compromising coherence or scaling economics—a gap the neon-ice heater technology directly targets Description : A neon-filled, hermetic package lets a thin film of solid neon coat a superconducting-resonator chip at millikelvin temperatures. Simple on-chip heaters briefly raise local spots to ≈25 K, causing the neon ice there to sublimate and redeposit elsewhere; thinning or thickening this ultra-low-loss dielectric shifts each resonator (or qubit) frequency with kHz precision over a MHz–GHz range. After tuning, heaters turn off, leaving a passive, loss-free device. Unlike SQUID flux lines (added noise), ex-situ laser or galvanic anneals (drift on cooldown), and dielectric varactors (extra loss), this method corrects frequency scatter in situ without new materials, masks, or steady control lines—turning a yield-limiting fabrication tolerance into a quick software trim inside the fridge. Advantages/Benefits : The neon-ice trimming platform beats every existing tuner on four fronts: Accuracy & range — kHz-level resolution across MHz-to-GHz spans at 10 mK, whereas SQUID loops or laser anneals top out at tens of MHz; Zero added loss — inert neon and superconducting heaters leave the resonator Q unchanged, unlike flux lines (1/f noise) or dielectric varactors (tan δ penalties); Simplicity — heaters pattern in the same mask set, no extra materials, masks, or bias wiring once tuning is done; Post-cooldown adjustability — corrects the 0.2…

Classification

Place of Performance

Contracting Office

Contacts