Description

The Air Force intends to solicit the following supply: Requesting the purchase of one (1) Husqvarna CS 2512 or Equal complete turn-key based Wire Saw System shall include but is not limited to the following components and accessories: Components: One (1) Wire Saw that meets the following specifications: Shall be designed to use with an external power supply specified below Shall be capable of cutting steel and concrete for handling both small and large operations while being compact and mobile. Shall be powered by a hydraulic motor that meets the following specifications: Deliver an output power rating of a minimum of 20 Kilowatts to the drive wheel Have a spindle starting torque of a minimum of 190 Newton-Meters The hydraulic motor and diamond wire shall be water cooled with a minimum pressure rate of 30 psi Have a variable gear box that lets the wire move at a minimum range of 65 – 80 feet per second. Shall not exceed a total overall weight of 330 pounds Shall be able to perform both vertical and horizontal cuts Shall include a guard that covers the internal components of the saw as well as the stored diamond wire inside of the Wire Saw. The user shall have the ability to adjust the hydraulic pressure going into the Wire Saw and visibly monitor the current pressure rating. Wire saw shall have one (1) outlet for water to allow the user to attach a water hose or an additional accessory The Wire Saw shall have wheels and a handle to be able to move and transport the wire saw by one person. Shall include adjustment screws to adjust the level of the saw depending on the location of the ground Shall be able to be anchored to the grand when in operation. Shal store a minimum of 52 feet of diamond wire Shall have a tension indicator that monitors the current tension of the diamond wire Shall include a tool kit with the necessary tools and brushes to be able to properly maintain and service the piece of equipment per the operators manual. Shall include a physical and digital copy of the operator's manual for the Wire Saw One (1) Power Pack that is powered by an electric motor shall supply power to the Wire Saw while meeting the following specifications: The Power Pack shall be able to operate and power the Wire Saw 20 feet away from the Wire Saw. Shall have an emergency stop button on the unit to shut down the Power Pack Shall have an ON/OFF button that switches the Power Pack ON/OFF Shall include one (1) remote control to control the cutting power and speed of the diamond wire on the Wire saw that meets the following specifications: The power cable to operate the remote control shall be a minimum of 25 feet long Shall have a physical button that switches the electric motor on the Power Pack ON/OFF Shall have an emergency stop button on the controller to shut down the Power Pack Shall have an analog display Shall have physical buttons to allow the user to interact with the user interface on the remote control Shall display the current voltage for all three p…

Classification

Place of Performance

Contracting Office

Contacts