Description
SOURCES SOUGHT NOTICE USCGC NORTHLAND (WMEC 904) DOCKSIDE REPAIRS FY27 This is a SOURCES SOUGHT NOTICE / REQUEST FOR INFORMATION ; not a pre-solicitation notice or solicitation for proposals/quotations. Pursuant to FAR Part 10 (Market Research), the purpose of this notice is to: (1) determine if sources capable of satisfying the agency's requirements exists, (2) determine if commercial items suitable to meet the agency's needs are available or could be modified to meet the agency's requirements, and (3) determine the commercial practices of company's engaged in providing the needed service or supply. Pursuant to FAR Part 6 and FAR Part 19, competition and set-aside decisions may be based on the results of this market research. This notice in no way obligates the Government to any further action. REQUIREMENT: This notice is issued by the U.S. Coast Guard, Surface Forces Logistics Center, and Norfolk, VA to identify sources capable of providing the following: DOCKSIDE REPAIRS SPECIFICATION: (Subject to change at the discretion of the Government). Contractor shall provide all necessary facilities, materials, equipment, and personnel to perform DOCKSIDE repairs to the U.S. Coast Guard Cutter (USCGC) NORTHLAND (WMEC 904). The vessel is home ported in PORTSMOUTH, VA. All work will be performed at the cutter home port. There is no geographical restriction for this cutter. SCOPE OF WORK: The scope of the acquisition is for the DOCKSIDE repairs of the USCGC NORTHLAND (WMEC 904). This work will include, but is not limited to the following Work Items: WORK ITEM 1: Tanks (Aviation Fuel Stowage And Overflow), Clean And Inspect WORK ITEM 2: Chain Lockers, Clean and Inspect WORK ITEM 3: Tanks, MP Fuel Stowage and Overflow, Clean and Inspect WORK ITEM 4: Tanks, MP Fuel Service, Clean and Inspect WORK ITEM 5: Tanks, Potable Water, Clean and Inspect WORK ITEM 6: Tanks, Ballast, Clean and Inspect WORK ITEM 7: Voids, Accessible, Clean and Inspect WORK ITEM 8: Tanks, Dirty Oil and Waste, Clean and Inspect WORK ITEM 9: Propulsion Shafting, Strain Gauge Alignment, Dockside, Check WORK ITEM 10: Circuit Breakers (400 HZ), Inspect and Test WORK ITEM 11: Vent Ducts, Engine Room, Commercial Cleaning WORK ITEM 12: Vent Ducts, Galley, Commercial Cleaning WORK ITEM 13: Vent Ducts, Laundry Exhaust, Commercial Cleaning WORK ITEM 14: Vent Ducts, All Other, Commercial Cleaning WORK ITEM 15: Commissary Hoist, Inspect and Service WORK ITEM 16: Anchor Chains and Ground Tackle, Inspect and Repair WORK ITEM 17: Anchor Windlass, Overhaul (OPTIONAL) WORK ITEM 18: Towing Bitts, Chocks, and Fairleads; Inspect and Test WORK ITEM 19: Warping Capstan, Overhaul WORK ITEM 20: Tanks, Aviation Fuel Storage, Preserve, Partial (OPTIONAL) WORK ITEM 21: Tanks, Ballast, Preserve, Partial (OPTI…
Classification
Place of Performance
Contracting Office
Contacts