Forklift Rental includes maintenanceview on SAM.gov

SCOPE OF WORK The Joint Staff Hampton Roads (JSHR) has a rental and preventive maintenance (PM) requirement for: 1) Forklift, 5,000 lbs. capacity lift, Liquid Propane (LP) Driven for outdoor and limited indoor service STATEMENT OF WORK This equipment is required to support the JSSSO-HR for warehousing use and logistical support to area components at the Joint Staff Suffolk Complex, Department of Defense (DOD). The specific requirement is for an LP powered 5,000 lbs. capacity lift forklift for outdoor and limited indoor service with specific uses identified as follows: Indoor warehouse lifts exceeding the 3,000 lbs capacity of the warehouse electric/hard-wheeled lift Bulk equipment/pallet transfer and on/off loading of delivery tractor/trailers Placement of traffic control-barriers (5,000 lbs) using barriers as a random Anti-Terrorism (AT[RRF1] ) measure; particularly during increased regional force protection posture Utilize during outside facility work, i.e. crane ops, paving, preparation for destructive weather, mitigating “missile hazards”, sandbag ops, etc. Uninterruptible Power Supplies (UPS) battery replacement movement and genset equipment repair/replacement lifts Event support; outdoor military events (sandbags, tent placement) Barrier placement for helo-pad certification/ops This equipment shall receive a preventative maintenance (PM) service in accordance with the following list, quarterly (four times per year). Technicians who are company certified [RRF2] with this type of equipment will conduct the PM. The service below will be accomplished ( Level 1 ). Perform Under hood Inspections Check motor oil and power steering Check coolant level and hoses Check fuel line for leaks Check all belt tensions Check fuel level Check batteries Perform Interior Inspections Check braking system and clutch Check steering system for proper operation and wear Check operation on the horn Check for an unobstructed view Check direction lever for proper operation Check all meters, gauges & control Check instrumentation and lights for proper function Check operator restraints/seat belts for proper operation and wear Check overhead guard for damage and overall condition Perform Exterior Inspections Check stop lights Check head, tail, direction lights Check clear, spot, warning lights Check tires, wheels, lug bolts Check hydraulic system for proper level Check Hydraulic hose condition Check steering mechanism Check drive line, universal joints Check forks and locks for proper condition and measure for wear Check propane tank for serviceability and leaks Check coupling devices Check for Fluid leaks on the mast, hydraulic, and motor/axles as applicable Perform General Checks Check hydraulic system for proper level Check brake system oil/fluid level Check exhaust system Check engine Check unit for safety defects in frame, function and operation Check chains for condition and measure for wear/adjust as necessary Check park brake and service brake for p…