THIS REQUEST FOR INFORMATION (RFI) / SOURCES SOUGHT NOTICE ISSUED SOLELY FOR INFORMATION AND PLANNING PURPOSES. THIS IS NOT A SOLICITATION. SUBMISSION OF INFORMATION ABOUT PRICING, DELIVERY, THE MARKET, AND CAPABILITIES IS HIGHLY ENCOURAGED AND ALLOWED UNDER THIS RFI FOR PLANNING PURPOSES IN ACCORDANCE WITH (IAW) FAR 15.201(e). DISCLAIMER This RFI is issued solely for information and planning purposes and does not constitute a solicitation. All information received in response to this RFI that is marked as proprietary will be handled accordingly. IAW FAR 15.201(e), responses to this notice are not offers and cannot be accepted by the Government to form a binding contract. Responders are solely responsible for all expenses associated with responding to this RFI. SOURCES SOUGHT/RFI DESCRIPTION This is NOT a solicitation announcement. This is a Sources Sought Notice / RFI only. The purpose of this Sources Sought Notice / RFI is to gain information about potential qualified sources and their size classification relative to NAICS 333924 Industrial Truck, Tractor, Trailer, and Stacker Machinery Manufacturing (size standard of 900 Employees). Responses to this Sources Sought Notice / RFI will be used by the Government to make appropriate acquisition decisions. After review of the responses to this Sources Sought Notice / RFI, further RFIs and/or a solicitation or other announcements may be published. The purpose of this contract is to have a vendor to replace/acquire Bobcat Skid Steer Loader. The vendor shall provide S64-2 T4 Bobcat Skid Steer Loader M0523 Or Equal) capable of support grounds maintenance, material handling, construction, etc. for the Tucson VAMC Engineering Department while meeting specifics list below: Salient Characteristics: Must be S64-2 T4 Bobcat Skid Steer Loader Model M0523 or equivalent with a Diesel-powered engine, Minimum rated operating capacity: 1,800 lbs., Engine horsepower: No less than 61 HP. Must be Four-wheel drive with hydraulic transmission system. Based on the 2025 Bobcat skid steer loader lineup, the M0523 appears to be a S450 model (length ~124.9 in / 3172 mm with bucket) in the 450-series, which is a mid sized loader in Bobcat s range. Key Specifications to meet or exceed:  Engine: 49.0 hp (36.5 kW) diesel turbo Rated Operating Capacity (ROC): 1370 lb (621 kg) at 50% of tipping load Auxiliary Hydraulic Flow: 16.7 gpm (63.2 L/min) High Flow Option: 26.7 gpm (101.1 L/min) Travel Speed: 7.6 mph (12.3 km/h) Two Speed Option: 11.0 mph (17.7 km/h) Key specifications to meet or equivalent: Operating Weight: 5370 lb. (2436 kg) Length (with bucket): 124.9 in (3172 mm) Width (with bucket): 62.0 in (1575 mm) Height (with cab): 77.8 in (1976 mm) Height to bucket hinge pin: 109.5 in (2781 mm) Max bucket reach: 20.8 in (528 mm) Ground clearance: 8.4 in (213 mm) Wheelbase: 35.4 in (899 mm) Deliverables: Fully equipped S64-2 T4 Bobcat Skid Steer Loader M0523 according to listed salient characteristics. Perform…