Ultra-Wideband Digital Receiversview on SAM.gov

THIS IS A SOURCES SOUGHT NOTICE (SSN)/REQUEST FOR INFORMATION (RFI) AND NOT A SOLICITATION OR AN INDICATION THAT A CONTRACTUAL COMMITMENT WILL EXIST AS A RESULT OF THIS SSN. This announcement is not a formal Request for Quotes (RFQ). This SSN/RFI is for informational and planning purposes only and does not guarantee that an award will be made. Any quotes submitted in response to this SSN/RFI are not quotes on which an order will be issued. The Government assumes NO financial responsibility for any costs incurred. A solicitation package is not available at this time. However, should such a requirement materialize, no basis for claims against NRL shall arise as a result of a response to this SSN/RFI or NRL's use of such information either as part of our evaluation process or in developing specifications or work statements for any subsequent requirement. LOCATION : Contracting Office Address: NRL, 4555 Overlook Avenue, SW, Washington, DC 20375 OBJECTIVE: Procure Ultra-Wideband Digital Receivers General Requirements: Following is a list of the salient characteristics of the required four channel wideband digital receiver : Four input channels Only independent tuning for each channel Input frequency range of 100 to 26,500 MHz Tuning resolution of 1 kHz steps at RF Noise Figure (30 dB Gain setting) of 17 dB max, 13 dB typical In Band Input 3rd order intercept point (20 dB Gain) of 0 dBm typical, -7 dBm min Input second-order intercept point of +40 dBm typical, +30 dBm min -20 - +60 deg C operating temperature range Ethernet remote access Analog Devices AD9694 Digitizer TI TMS320C6457 SOM Digital Signal Processor Input bandwidth selections of 100 MHz and 200 MHz Single 40 Gb I/Q Data Transport via QSFP+ port Size of 6.7” x 7.2” x 2.5” Approx weight of 6.5 lbs Power consumption of 9 – 16 VDC input; <55W Cooling: bolt-on fan module Digitized IF Output of IQ data in SDDS, SDDSX, VITA-49 formats Maximum RF input of +15 dBm Gain of +60dB nominal above RF input 90 dB range of manually controlled gain Following is a list of the salient characteristics of the required single channel 40 GHz ultra-wideband digital receiver : One input channel Input frequency range of 50 to 40,000 MHz Tuning resolution of 1 kHz steps at RF Noise Figure (40 dB Gain setting) of 14 dB typical, 16 dB max In Band Input 3rd order intercept point of 0 dBm typical, -5 dBm min Input second-order intercept point of +25 dBm typical, +20 dBm min (0.5 – 5 GHz), +40 dBm typical, +30 dBm min (5 – 26 GHz), -20 - +60 deg C operating temperature range Ethernet remote access Analog Devices AD9213 Digitizer TI TMS320C6457 SOM Digital Signal Processor Input bandwidth selections of 100 MHz Single 40 Gb I/Q Data Transport via QSFP+ port Size of 4.78” x 6.94” x 2.54” Approx weight of 6 lbs Power consumption of 9 – 16 VDC input; <48W Cooling: bolt-on fan module Digitized IF Output of IQ data in SDDS, SDDSX, VITA-49 formats Maximum RF input of +10 dBm Gain of +20dB nominal above RF input 40 dB range of…