STATEMENT OF WORK CGC MUNRO NR2 SHIP SERVICE DIESEL GENERATOR EMCP and ECM INSTALL Background. Munro has had several issues with the Load Sharing and speed control of the #2 SSDG over the last several weeks. With extensive trouble shooting all results have not corrected the issue. When singled up the generator will not hold the load and cause a “brown out” when in parallel with the other generators trips offline under reverse power relay condition. Ships engineers found Electronic Modular Control Panel (EMCP 3.2) and Electronic Control Module (ECM) faulty which are now obsolete. Cat tech is needed to install both modules and reprogram to stabilize generator. Scope . Caterpillar certified Tech Rep to provide parts and install EMCP and ECM in the #2 SSDG control panel. MUNRO SSDG serial is NSC 006. The Tech Rep will be responsible for the following: Providing technical expertise to install all parts and programing in the SSDG's local operating panel Supply parts and wiring needed for completion Test local operation after install to confirm proper operation of the 1SSDG. Provide a condition Trip report once completed. GFE: NA Contractor Furnished Equipment: EMCP part number: 4529414 PANEL GP-ELE, ECM part number 511 3143. Tasks . The contractor shall provide technical expertise to install EMCP and ECM in the No. 2 SSDG to normal operation. Delivery . Contractor shall provide a final report within 3 days of contract period of performance. Place of performance : CGC MUNRO Attn: Engineer Officer USCG Base Kodiak, 5th St, Kodiak Station, AK 99619 Period of performance - 3 July – July 2026 Points of Contact . 10.1. USCG-SFLC-LRE PL Asset Management: LTJG Igor Guerrero, igor.guerrero@uscg.mil 510-685-0519