This is a SOURCES SOUGHT ANNOUNCEMENT ONLY. It is neither a solicitation announcement nor a request for proposals or quotes and does not obligate the Government to award a contract. Responses to this source sought notice must be in writing. The purpose of this sources sought announcement is for market research to make appropriate acquisition decisions and to gain knowledge of potential businesses interested and capable of providing the services described below. Sepulveda Ambulatory Care Center is requesting contractors to provide brand name Digital Sink Faucet with Temp Control. 1. CHARACTERISTICS: Equipment must have salient characteristics to enable the government to perform the capabilities: Equal to Armstrong MX1-20 RADA Digital Faucet W/Temp control Quantity 75 DIGITAL FAUCET    Digital Faucet shall have non-touch flow (IR) and temperature (capacitive) controls Digital Faucet shall have smooth bore laminar flow copper outlet pipe with copper lined insert and flexible PEX lined hoses Digital Faucet shall allow programmable temperatures, flow rates, run time, automated blend duty flush and cold flush, thermal disinfection Digital Faucet shall be of 95% engineering metallics and lead free compliant and IP X4 rated SHALL HAVE THE FOLLOWING OPERATIONAL SPECIFICATIONS: +/- 2°F water temperature control Programmable flow rates from 1 2.2GPM (3.8 8.3LPM) Programmable set point range of 91.4-113°F (33-45°C) Programmable thermal disinfection range of 140-176°F (60-80°C) Automatic safe closure of hot water inlet in response to inlet supply failure, power failure Programmable automatic fixture flush to evacuate stagnant water Operational water pressure range of 14psig (1barg) to 145psig (10barg) SHALL HAVE THE FOLLOWING CONNECTIVITY SPECIFICATIONS: Bluetooth enabled for direct connectivity to the mobile app for field adjustments MODBUS RTU RS485 port for connectivity to either a Local Area Network or integration with a Building Automation System (BAS) SHALL BE CERTIFIED TO ASSE 1070, CUPC, UL1951, UL1310, CAN/CSA C22.2 No. 223, FCC Part 16, NSF 61, NSF 372 (conforms to ASME B112.18.1/CSA B125.1), WaterSense®, DOE Energy Policy Act 1992, ADA, ICC/ANSI A117.1, CSA B651, OBC WARRANTY shall have a 3-year all mechanical and electrical parts and a 1 year all finish parts warranty Armstrong Sense DMv2 Shower Quantity 5 Characteristics Programmable timed flow No touch on/off control No touch temperature adjustment Programable min/max temperature access limits Programable thermal disinfection mode Data logging Capabilities 2. FUNCTIONAL AND PERFORMANCE CHARACTERISTICS: Equipment must provide the functional and performance capability as listed above in section in above. 3. Provide recommendations for any findings outside of specified parameters If you are interested and are capable of providing the required service(s) please provide the following information. (1) Company Name, Address, Point of Contact (2) Size status and representations of your busine…