Cooler Lube Oil Main Engine & Cooler, Fluid, Jacket Waterview on SAM.gov

The United States Coast Guard Surface Forces Logistics Center has a requirement and requesting quotations for the following parts: Item 1) NSN: 2930-01-362-4819 COOLER LUBE OIL MAIN ENGINE WMEC 270 MDE LUBE OIL COOLER FOR #1 AND #2 MAIN DIESEL ENGINES. DIA. - 16.625"NOM. LENGTH - 150.00"NOM. TUBING O.D. - 12.750"NOM. TUBE QUANTITY - 392 OIL FLOW RATE - 340.0 GPM HEAT TRANSFER METHOD - INDIRECT DRAIN PLUG LOCATION - BOTTOM EFFECTIVE HEAT TRANSFER SURFACE AREA - 373.0 SQ.FT. MATERIAL - STEEL SHELL THE COOLERS SHALL BE MADE TO SERIAL NUMBER 13154 DATE MANUFACTURE 2011 SPECIFICATIONS. AFTER HYDROTESTING THE OIL SIDE WILL BE DRYED AND FLUSHED WITH A PRESERVATIVE. THE NUTS THAT FASTEN THE END NOZZLES SHALL BE 316 STAINLESS STEEL LOCK NUTS. MFG: QUINTEL INC. PN: 26-DL-2007-18 QTY: 2 EA Item 2) NSN: 4420-01-397-2075 COOLER, FLUID, JACKET WATER 270 CLASS MAIN DIESEL ENGINE JACKET WATER HEAT EXCHANGER. SPECIFICATIONS: COOLER FLUID INDUSTRIAL, TYPE SINGLE PASS SHELL AND TUBE TYPE, 334 SQUARE FEET COOLING SURFACE, 356 TUBES, SIZE AND LENGTH 114 INCHES X 3/8 INCH. TUBE PRESSURE 100 PSI, TEST PRESSURE 150 PSI, TEMP 200 DEG. SHELL: 100 PSI, TEST PRESSURE 150 PSI, TEMP 200 DEG. MATERIAL: BRASS. DIAMETER: 14.65 INCHES, LENGTH: 137.250 INCHES. DESIGN CONTROL REFERENCE: 10-114-1FH-AEW. EACH HEAT EXCHANGER SHALL BE INDIVIDUALLY PACKAGED AND MARKED AS COOLER, FLUID, INDUSTRIAL, NSN 4420-01-397-2075. MFG: QUINTEL INC. PN: 26-DCL-0717-74 QTY: 2 EA SHIP TO: USCG SFLC BALTIMORE RECEIVING ROOM – 88 2401 HAWKINS POINT ROAD BALTIMORE, MD 21226 This is a combined synopsis/solicitation for a commercial item prepared in accordance with the format outlined in FAR Subpart 12.6, FAC 2026-01 (March 2026) and as supplemented with additional information included in this notice. This announcement constitutes the only solicitation. Quotations are being requested and a written solicitation will not be issued. The NAICS code for this solicitation is 333618 and the business size standard is 1,500. The resultant purchase order will be awarded using simplified acquisition procedures in accordance with FAR 13.106 apply. Substitute parts are not acceptable. It is anticipated that a non-competitive sole source purchase order shall be awarded as a result of this synopsis/solicitation. It is the Government's belief that only Quintel Inc. and/or their authorized distributors can offer these units. Concerns having the expertise and required capabilities to provide this item are invited to submit complete information discussing the same within two (2) calendar days from the day this notice posted. The data must include sufficient detail to allow the Coast Guard to evaluate the proposal relative to the requirements. The information submitted must include a letter from the OEM verifying the offeror is an authorized distributor verifying the OEM will supply genuine OEM parts. The U.S. Coast Guard intends to award on an all or none basis to a responsible offeror whose offer confor…