NAICS 325211 – Plastics Material and Resin Manufacturing
Sol # FA302026Q0081
AI Summary
• Amendment 2 - FA302026Q0081 is a solicitance for Quote due on August 18, with a new Due Date set by amendment Q.
• The contract is Amendment 1 - SOW (Solicitation Objective Work) under Contract 359 TSR in Pensacola, FL: Composite Course Panels IAW Attachment 1 Specification.
QUALITY RULES:
- • Amendment 2 is a solicitance for Quote due on August 18 with updated contract information.
NAICS 325211 – Plastics Material and Resin Manufacturing
Sol # W911QY26RNZ42a
AI Summary
• The U.S. Army Contracting Command – Aberdeen Proving Ground (ACC-APG) in support of the U.S. Army Combat Capabilities Development Command – Soldier Center (DEVCOM-SC) intends to award a Firm Fixed Price contract on a sole source basis to Formerra LLC located at 1250 Windham Pkwy, Romeoville, Illinois 60446-1673.
• The procurement is for the Nylon 6/6 Zytel 42a polymer and involves sourcing from DuPont, as only one company meets the size standard (1,250 employees) and has a license from DuPont in North America, making Formerra LLC the sole partner for this material.
• The customer prohibits changing the materials used in production of government furnished materials (GFM), and no other company can be capable of providing the required polymer due to its specialized nature.
• Responses to identify interest and capability should go to alexandra.m.biro2.civ@army.mil via EMAIL ONLY, and must include Firm Fixed Price contract award solicitation request by 1500 EST 21 August 2026.
CombinedSBA Certified Women-Owned Small Business (WOSB) Program Set-Aside (FAR 19.15)
NAICS 325211 – Plastics Material and Resin Manufacturing
Sol # S-133966
AI Summary
•
• The use of silicone foam as a starting material allows for conversion into porous silica through a controlled heating process.
• Because the material can be molded before conversion, manufacturers can produce porous silica components in various sizes and shapes.
• Porous silica materials are chemically stable, heat resistant, and widely used in separation, filtration, and catalytic applications due to their large internal surface areas and pathways for liquids and gases.
• Advanced manufacturing process uses readily available materials, offers a scalable solution potentially at lower cost compared to traditional methods.
NAICS 325211 – Plastics Material and Resin Manufacturing
Sol # N0016426Q0268
AI Summary
• The NSWC Crane requirement is for the cut of 20 NORYL ROD 5" DIA BLACK 30% GLASS FILL SE1-GFN3 with shipment FOB Destination: Crane Indiana 47522.
• Contractor must be registered in the System for Award Management (SAM) and offer quantities comply with the total of 80 Feet requirement over 4 sections.
• No deadlines specified for delivery, but a response by August 24, 2026 is due; electronic invoicing will occur via PIEE/WAWF with a 30-day period for 100% clearance.
NAICS 325211 – Plastics Material and Resin Manufacturing
Sol # N6600126Q6249
AI Summary
• TCJ, Inc dba Engineered Packaging Solutions is the only responsible source for purchase of customized rotomolded container with polyurethane foam insert for Antenna.
• Manufacturer P/N: 25-046271 QTY: 13 Item 0002: Stencil Setup Fee with a single item purchase due to lack of competitive quotes.
• The point of contact is Kylie Nevells at kylie.m.nevells.civ@us.navy.mil, and responses must be sent via email clearly demonstrating firm capabilities.
EXAMPLE 3 INPUT:
The U.S. Army Corps of Engineers, Louisville District, requests offers for a dredging service at the McAlpine Locks and Dam on the Ohio River near Louisville, Kentucky, to maintain a navigable channel depth of 9 feet with approximately 200,000 cubic yards of sediment removal.
EXAMPLE 3 OUTPUT:
• The Army Corps of Engineers requires dredging of approximately 200,000 cubic yards of sediment at the McAlpine Locks and Dam near Louisville, KY.
• This is an unrestricted full and open competition under NAICS 237990.
• Work must maintain a 9-foot navigable channel depth with a specified quantity of sediment removal.
NAICS 325211 – Plastics Material and Resin Manufacturing
Sol # SPE8E526Q0354
AI Summary
• NSN 9330011682090 PLASTIC STRIP is the correct procurement for the provided information.
• Approved source: NSF International 79318 227341 is a valid and approved source for the procurement of this contract.
• Interested parties are invited to submit quotes which, if timely received, shall be considered; quotes may be submitted electronically through the specified link.
NAICS 325211 – Plastics Material and Resin Manufacturing
Sol # S-195397
AI Summary
• Acid-tuned Ter phenyl Membranes (ATM) from Los Alamos National Laboratory strengthen proton conductivity by chemically modifying acid site proximity.
• By adding an electron-withdrawing unit next to each sulfonic acid group, ATM increases water uptake reduction and dimensional stability.
• Compared to unmodified membranes, ATM reduces water uptake by more than half.
• Technical Description
• A rigid terphenyl-based polymer backbone supports sulfonic acid groups responsible for proton movement.
NAICS 325211 – Plastics Material and Resin Manufacturing
Sol # SPE8EF26T1465
AI Summary
• The U.S. Army requires rolling stock for material handling in the Army Logistics System, specifically a type of roller to be acquired through NSN 3990015549920.
• The quantity required is 86 Units Initially Available (UI) per Engineering Order ADO.
• The delivery point is intended for delivery via the Western United States Automated Logistics and Distribution Center.
NAICS 325211 – Plastics Material and Resin Manufacturing
Sol # S-194655
AI Summary
• Hydrogen energy systems that rely on PFSA materials for an ionomeric binder may switch to a PFAS-free sulfonated poly(norbornene) ionomeric binder due to regulatory pressure and performance advantages.
• The proposed material's ability to shuttle protons, manage water, and facilitate reactant gas access under various conditions positions it as a reliable choice for high-performance proton exchange membrane fuel cells and water electrolyzers.
• Compared to conventional aromatic alternatives, the proposed material demonstrates improved poison resistance against precious-metal catalysts, reducing potential damage.
Quality Rule Adherence:
- The language used is clear and concise, eliminating unnecessary words or phrases.
- Specific details about regulatory pressure and environmental concerns are included without repetition or speculation.
NAICS 325211 – Plastics Material and Resin Manufacturing
Sol # W911S225U1877
AI Summary
• The U.S. Army Corps of Engineers requires the procurement of drum kits containing 3 complete units of 870 slow black urethane casting resin and 1 complete unit of 870 slow tan urethane casting resin.
• NAICS code 321420 applies for this requirement, as the materials described are classified under Other Plastics Manufacturing.
• Deliverables require a mix ratio of 100A:60B by weight with specific technical specifications including viscosity, density, and heat distortion temperature details. The work must be delivered within 30 days or upon receipt of the first shipment of black kits to ensure timely manufacturing completion.
FedOps
